2024 XTOOL M822 Adapter for Toyota 8A 2014-2019 Non-Smart Key All Key Lost Works with KC501 Or KC100 & KS-1 Emulator
XTOOL M822 Adapter For Toyota 8A AIl Key Lost Programming Need Work With KC501 Programmer &KS-1 Emulator For X100 PAD3, X100 PAD3 Elite, D8, D9, D9 Pro, A80PRO, IP819, IK618, D8BT, A80, A80PRO MASTER, IP616, IP819TP, IK618
XTOOL M822 Adapter for Toyota 8A 2014-2019 All Key Lost With M822 Adapter, you can save as much as 65% of the calculation time on the process, or save you from plugging the key emulator in and out for hundreds of times.Functions:2014-2019 TOYOTA 8A Non-smart key blade key programmingPincode-freeAdd key/All keys lost supportedNo specialized keys neededCompatible devices: X100 PAD3, X100 PAD3 SE, X100 MAX, D8, D9, D9 Pro, A80PRO, IP819, IK618, D8BT, A80, A80PRO MASTER, IP616, IP819TP, IK618Accessories Needed* XTOOL Tablet* Main Cable & OBD2-16 Connector* M822 Communication Adapter* Toyota 8A Specialized Wiring Harness* KC100 Or KC501 Key Programmer* KS-1 Toyota Key Emulator* Network ConnectionModels SupportedFor Toyota LevinFor CorollaFor RAV4For PradoFor Land CruiserFor CamryFor HighlanderFor ReizFor SiennaFor HiaceFor HiluxFor Crown KlugerFor Aygo with IMMO box F3-F4-K6-S6Note: This is not compatible with American models with “H” Chip blade keys. For these models, please use the Reset IMMO function.Connection method
Connect via OBD:1. Connect KC100/KC501 to the device via USB and prepare a KS-12. Connect the device (or VCI box) with the M822 Adapter using the main cable.3. Connect the Toyota cable to the car using OBD port.4. Take the battery clip from the car out and use the battery clip to connect the cable to the battery.5. Take out the fuse from the fuse box then plug the cable into it.6. Find the 12V DC male port from the Toyota cable and connect it to the 12V DC female port from the main cable.*Note: For different models, the connection method might not be same. Sometimes an extend cable is needed, and the fuse might be different. Please check XTOOL tablets for detailed wiring diagram when connecting to vehicle and fusebox.
Connect on bench:1. Connect KC100/KC501 to the device via USB and prepare a KS-12. Connect the device (or VCI box) with the M822 Adapter using the main cable.3. Connect the Toyota cable to the car using OBD port.4. Take the battery clip from the car out and use the battery clip to connect the cable to the battery.5. Take out the fuse from the fuse box then plug the cable into it.6. Find the 12V DC male port from the Toyota cable and connect it to the 12V DC female port from the main cable.*Note: For different models, the connection method might not be same. Sometimes an extend cable is needed, and the fuse might be different. Please check XTOOL tablets for detailed wiring diagram when connecting to vehicle and fusebox.
